R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

323
# Display statistics of BGP IPv6 unicast routes received from BGP peer 1::1.
<Sysname> display bgp routing-table ipv6 peer 1::1 received-routes statistics
Received routes total: 1
Table 90 Command output
Field Description
Advertised routes total Total number of routes advertised to the specified peer.
Received routes total Total number of routes received from the specified peer.
display bgp routing-table ipv6 unicast statistics
Use display bgp routing-table ipv6 unicast statistics to display BGP IPv6 unicast route statistics.
Syntax
display bgp routing-table ipv6 [ unicast ] [ vpn-instance vpn-instance-name ] statistics
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN instance is specified, the command displays the BGP IPv6 unicast route
statistics for the public network.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display statistics of BGP IPv6 unicast routes.
<Sysname> display bgp routing-table ipv6 statistics
Total number of routes: 4
display bgp update-group ipv4 unicast
Use display bgp update-group ipv4 unicast to display information about BGP update groups for the BGP
IPv4 unicast address family.
Syntax
display bgp update-group ipv4 [ unicast ] [ vpn-instance vpn-instance-name ] [ ip-address ]