R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

393
If the peer keep-all-routes command is configured, the refresh bgp ipv4 unicast import command does
not take effect.
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Manually soft-reset all BGP sessions for the IPv4 unicast address family.
<Sysname> refresh bgp ipv4 all
Related commands
• peer capability-advertise route-refresh
• peer keep-all-routes
refresh bgp ipv6 unicast
Use refresh bgp ipv6 unicast to manually soft-reset BGP sessions for the IPv6 unicast address family.
Syntax
refresh bgp { ipv6-address | all | external | group group-name | internal } { export | import } ipv6
[ unicast ] [ vpn-instance vpn-instance-name ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
ipv6-address: Soft-resets the BGP session to the specified peer. The ipv6-address argument refers to the
IPv6 address of a peer.
all: Soft-resets all BGP sessions.
external: Soft-resets all EBGP sessions.
group group-name: Soft-resets the BGP sessions to the peers of the specified peer group. The group-name
argument refers to the name of a peer group, a case-sensitive string of 1 to 47 characters.
internal: Soft-resets all IBGP sessions.
export: Performs outbound soft-reset (filters routes advertised to the specified peer or peer group by using
the new configuration).
import: Performs inbound soft-reset (filters routes received from the specified peer or peer group by using
the new configuration).
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN instance is specified, this command performs manual soft-reset on BGP
sessions for the public network IPv6 unicast address family.
Usage guidelines
After the route selection policy is modified, execute this command with the export keyword to enable the
local router to filter routing information based on the new policy and send the matching routes to the BGP
peer. If you execute this command with the import keyword, you enable the local router to advertise a