R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

30
Field Descri
p
tion
route Number of routes installed by the protocol.
active Number of active routes.
added
Number of routes added to the routing table after the router started up or the routing table was
last cleared.
deleted Number of routes marked as deleted, which will be cleared after a period.
Total Total number of routes.
display max-ecmp-num
Use display max-ecmp-num to display the maximum number of ECMP routes.
Syntax
display max-ecmp-num
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display the maximum number of ECMP routes.
<Sysname> display max-ecmp-num
Max-ECMP-Num in use: 6
Max-ECMP-Num at the next reboot: 10
Table 9 Command output
Field Descri
p
tion
Max-ECMP-Num in use Maximum number of current ECMP routes in use.
Max-ECMP-Num at the next reboot Maximum number of ECMP routes at the next reboot of the device.
display rib attribute
Use display rib attribute to display route attribute information in the RIB.
Syntax
display rib attribute [ attribute-id ]
Views
Any view