R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

409
Matched: 0
node 1 permit:
if-match acl 3999
Matched: 0
node 2 permit(no resource):
if-match acl 2000
apply next-hop 2.2.2.2
Matched: 0
node 5 permit:
if-match acl 3101
apply next-hop 1.1.1.1
Matched: 0 (no statistics resource)
Total matched: 0
Table 94 Command output
Field Description
Policy based routing information for
interface Vlan-interface1(failed)
PBR configuration and statistics on VLAN-interface 1.
failed indicates that the policy (including all its nodes) failed to be
assigned to the driver.
For a global interface (with only a one-dimensional interface number, for
example, VLAN-interface 1), failed can be displayed only when you
specify the slot slot-number or chassis chassis-number slot slot-number
option for the command.
node 0 deny(not support)
node 2 permit(no resource)
Match mode of the node, permit or deny.
not support means the device does not support match criteria configured
on the node; no resource means the device has insufficient ACL
resources, and failed to assign ACL resources to the node.
For a global interface (with only a one-dimensional interface number, for
example, VLAN-interface 1), not support and no resource can be
displayed only when you specify the slot slot-number or chassis
chassis-number slot slot-number option for the command.
if-match acl Matches packets against the ACL.
apply next-hop Specify a next hop for permitted packets.
Matched: 0 (no statistics resource)
Number of successful matches on the node (no statistics resource
indicates insufficient statistics resources).
For a global interface (with only a one-dimensional interface number, for
example, VLAN-interface 1), no statistics resource can be displayed only
when you specify the slot slot-number or chassis chassis-number slot
slot-number option for the command.
Total matched Total number of successful matches on all nodes.
Related commands
reset ip policy-based-route statistics
display ip policy-based-route local
Use display ip policy-based-route local to display local PBR configuration and statistics.