R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

411
Field Description
node 0 deny/node 2 permit Match mode of the node: permit or deny.
if-match acl Match packets against the ACL.
apply next-hop Specify a next hop for permitted packets.
Matched: 0 Number of successful matches on the node.
Total matched Total number of successful matches on all nodes.
Related commands
reset ip policy-based-route statistics
display ip policy-based-route setup
Use display ip policy-based-route setup to display PBR configuration.
Syntax
display ip policy-based-route setup
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display PBR configuration.
<Sysname> display ip policy-based-route setup
Policy Name Interface Name
pr01 Vlan-interface1
Table 96 Command output
Field Description
Interface Name Interface where the policy is applied.
Related commands
ip policy-based-route
if-match acl
Use if-match acl to configure an ACL match criterion.
Use undo if-match acl to remove the ACL match criterion.