R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

430
FE80::20C:29FF:FE7A:E3E4 2/3 0
Total 2/3 0
Table 104 Command output
Field Descri
p
tion
Peer IPv6 address of the neighbor.
Optimal Number of optimal routes.
Aging Number of routes in aging state.
Garbage Number of routes in Garbage-collection state.
Total Total number of routes learned from RIPng neighbors.
filter-policy export
Use filter-policy export to configure RIPng to filter redistributed routes. Only routes not filtered can be
advertised in update messages.
Use undo filter-policy export to remove the configuration.
Syntax
filter-policy { acl6-number | prefix-list prefix-list-name } export [ protocol [ process-id ] ]
undo filter-policy export [ protocol [ process-id ] ]
Default
RIPng does not filter redistributed routes.
Views
RIPng view
Predefined user roles
network-admin
mdc-admin
Parameters
acl6-number: Specifies an ACL by its number in the range of 2000 to 3999 to filter redistributed routes.
prefix-list prefix-list-name: Specifies an IPv6 prefix list by its name, a string of 1 to 63 characters, to filter
redistributed routes.
protocol: Filters routes redistributed from a routing protocol, including bgp4+, direct, isisv6, ospfv3,
ripng, and static.
process-id: Specifies the process ID of the specified routing protocol, in the range of 1 to 65535. This
argument is available only when the routing protocol is ripng, ospfv3, or isisv6. The default is 1.
Usage guidelines
If the protocol argument is specified, RIPng filters only routes redistributed from the specified routing
protocol. Otherwise, RIPng filters all redistributed routes.
To use an advanced ACL (with a number from 3000 to 3999) in the command, configure the ACL in one
of the following ways: