R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

435
Views
RIPng view
Predefined user roles
network-admin
mdc-admin
Parameters
route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters.
value: Specifies the preference for RIPng routes, in the range of 1 to 255.
Usage guidelines
You can specify a routing policy to set a preference for the matching RIPng routes.
• The preference set by the routing policy applies to all matching RIPng routes. The preference of
other routes is set by the preference command.
• If no preference is set by the routing policy, the preference of all RIPng routes is set by the preference
command.
Examples
# Set the preference for RIPng routes to 120.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] preference 120
reset ripng process
Use reset ripng process to reset a RIPng process.
Syntax
reset ripng process-id process
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
process-id: Specifies a RIPng process by its ID in the range of 1 to 65535.
Usage guidelines
After executing the command, you are prompted to confirm the operation.
Examples
# Reset RIPng process 100.
<Sysname> reset ripng 100 process
Reset RIPng process? [Y/N]:y