R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

438
[Sysname] interface vlan-interface 101
[Sysname-Vlan-interface101] ripng default-route originate
ripng enable
Use ripng enable to enable RIPng on an interface.
Use undo ripng enable to disable RIPng on an interface.
Syntax
ripng process-id enable
undo ripng enable
Default
RIPng is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
process-id: Specifies a RIPng process by its ID in the range of 1 to 65535.
Examples
# Enable RIPng 100 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng 100 enable
ripng metricin
Use ripng metricin to configure an interface to add a metric to inbound RIPng routes.
Use undo ripng metricin to restore the default.
Syntax
ripng metricin value
undo ripng metricin
Default
The additional metric of an inbound route is 0.
Views
Interface view
Predefined user roles
network-admin
mdc-admin