R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

439
Parameters
value: Adds an additional metric to inbound routes, in the range of 0 to 16.
Examples
# Configure VLAN-interface 100 to add a metric of 12 to inbound RIPng routes.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng metricin 12
ripng metricout
Use ripng metricout to configure an interface to add a metric to outbound RIPng routes.
Use undo ripng metricout to restore the default.
Syntax
ripng metricout value
undo ripng metricout
Default
The additional metric of outbound routes is 1.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
value: Adds an additional metric to outbound routes, in the range of 1 to 16.
Examples
# Configure RIPng on VLAN-interface 100 to add a metric of 12 to outbound routes.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng metricout 12
ripng poison-reverse
Use ripng poison-reverse to enable the poison reverse function.
Use undo ripng poison-reverse to disable the poison reverse function.
Syntax
ripng poison-reverse
undo ripng poison-reverse
Default
The poison reverse function is disabled.