R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

457
Field Descri
p
tion
State
Interface state:
• DOWN—No protocol traffic can be sent or
received on the interface.
• Waiting—The interface starts sending and
receiving Hello packets and the router is trying to
determine the identity of the (Backup) designated
router for the network.
• p-2-p—The interface will send Hello packets at the
interval of HelloInterval, and try to establish an
adjacency with the neighbor.
• DR—The router is the designated router on the
network.
• BDR—The router is the backup designated router
on the network.
• DROther—The router is a DROther router on the
attached network.
Type
Network type of the interface: PTP (P2P), PTMP
(P2MP), broadcast, or NBMA.
MTU MTU value of the interface.
Priority DR priority of the interface.
Designated router DR on this link.
Backup designated router BDR on this link.
Timer interval configured
Time intervals in seconds configured on the interface:
• Hello—Hello interval.
• Dead—Dead interval.
• Wait—After this timer expires, the interface quits
from the waiting state.
• Retransmit—LSA retransmission interval.
• Transmit delay—Transmission delay of the
interface.
Neighbor count Number of Neighbors on the interface.
Adjacent neighbor count Number of Adjacencies on the interface.
Previous state
Previous state of the interface: Down, Waiting, P-2-P,
DR, BDR, or DROther.
display ospfv3 lsdb
Use display ospfv3 lsdb to display the OSPFv3 LSDB.
Syntax
display ospfv3 [ process-id ] lsdb [ { external | grace | inter-prefix | inter-router | intra-prefix | link |
network | router | unknown [ type ] } [ link-state-id ] [ originate-router router-id | self-originate ] |
statistics | total | verbose ]