R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

463
Syntax
display ospfv3 [ process-id ] [ area area-id ] peer [ [ interface-type interface-number ] [ verbose ] |
peer-router-id | statistics ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
area area-id: Specifies an area by its ID, an IPv4 address or a decimal integer in the range of 0 to
4294967295 that is translated into an IPv4 address by the system.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed neighbor information.
peer-router-id: Specifies a neighbor.
statistics: Displays OSPFv3 neighbor statistics.
Usage guidelines
If no process-id is specified, this command displays neighbor information for all processes.
If no area is specified, this command displays neighbor information for all areas.
If no interface or no neighbor is specified, this command displays neighbor information for all interfaces.
Examples
# Display the neighbor information for OSPFv3 process 1 on an interface.
<Sysname> display ospfv3 1 peer vlan-interface 1
OSPFv3 Process 1 with Router ID 1.1.1.1
Area: 0.0.0.1
-------------------------------------------------------------------------
Router ID Pri State Dead-Time Interface Inst ID
2.2.2.2 1 Init/ - 00:00:36 Vlan1 0
Table 116 Command output
Field Descri
p
tion
Router ID Router ID of a neighbor.
Pri Priority of neighbor router.
State Neighbor state.
Dead Time Dead time remained.