R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

483
Use undo graceful-restart interval to restore the default.
Syntax
graceful-restart interval interval-value
undo graceful-restart interval
Default
The GR restart interval is 120 seconds.
Views
OSPFv3 view
Predefined user roles
network-admin
mdc-admin
Parameters
interval-value: Specifies GR restart interval in the range of 40 to 1800 seconds.
Usage guidelines
The value of the GR restart interval cannot be smaller than the maximum OSPFv3 neighbor dead time of
all the OSPFv3 interfaces. Otherwise, GR restart might fail.
Examples
# Configure the GR restart interval for OSPFv3 process 1 as 100 seconds.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] graceful-restart interval 100
Related commands
ospfv3 timer dead
import-route (OSPFv3 view)
Use import-route to redistribute routes.
Use undo import-route to disable route redistribution.
Syntax
import-route protocol [ process-id | all-processes | allow-ibgp ] [ cost cost | route-policy
route-policy-name | type type ] *
undo import-route protocol [ process-id | all-processes ]
Default
OSPFv3 route redistribution is disabled.
Views
OSPFv3 view
Predefined user roles
network-admin