R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

485
Use undo log-peer-change to disable the logging of neighbor state changes.
Syntax
log-peer-change
undo log-peer-change
Default
The logging of neighbor state changes is enabled.
Views
OSPFv3 view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This feature enables the device to deliver logs about neighbor state changes to its information center,
which processes logs according to user-defined output rules (whether to output logs and where to output).
For more information about the information center, see Network Management and Monitoring
Configuration Guide.
Examples
# Disable the logging of neighbor state changes for OSPFv3 process 100.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] undo log-peer-change
lsa-generation-interval
Use lsa-generation-interval to configure the OSPFv3 LSA generation interval.
Use undo lsa-generation-interval to restore the default.
Syntax
lsa-generation-interval maximum-interval [ minimum-interval [ incremental-interval ] ]
undo lsa-generation-interval
Default
The maximum interval is 5 seconds, the minimum interval is 0 milliseconds, and the incremental interval
is 0 milliseconds.
Views
OSPFv3 view
Predefined user roles
network-admin
mdc-admin