R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

505
verbose: Displays detailed IPv6 IS-IS routing information.
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535.
Usage guidelines
If no level is specified, this command displays both Level-1 and Level-2 route information.
Examples
# Display IPv6 IS-IS route information.
<Sysname> display isis route ipv6
Route information for IS-IS(1)
------------------------------
Level-1 IPv6 Forwarding Table
-----------------------------
Destination: 2001:1:: PrefixLen: 64
Flag : R/L/- Cost : 20
Next Hop : FE80::200:5EFF:FE64:8905 Interface: Vlan1
Destination: 2001:2:: PrefixLen: 64
Flag : D/L/- Cost : 10
Next Hop : Direct Interface: Vlan1
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
Level-2 IPv6 Forwarding Table
-----------------------------
Destination: 2001:1:: PrefixLen: 64
Flag : -/-/- Cost : 20
Destination: 2001:2:: PrefixLen: 64
Flag : D/L/- Cost : 10
Next Hop : Direct Interface: Vlan1
Flags: D-Direct, R-Added to Rib, L-Advertised in LSPs, U-Up/Down Bit Set
Table 128 Command output
Field Descri
p
tion
Destination IPv6 destination prefix.
PrefixLen Length of the prefix.