R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

507
Table 129 Command output
Field Descri
p
tion
IPV6 Dest IPv6 destination address and prefix.
Cost Route cost.
Flag/Flags
Route flag:
• D—This is a direct route.
• R—The route has been added into the routing table.
• L—The route has been advertised in an LSP.
• U—Route leaking flag, indicating the Level-1 route is from Level-2. U means the route
will not be returned to Level-2.
Admin Tag Administrative tag.
Src Count Number of advertisement sources.
Next Hop Next hop.
Interface Outbound interface.
ExitIndex Outbound interface index.
display isis spf-tree ipv6
Use display isis spf-tree ipv6 to display IPv6 IS-IS topology information.
Syntax
display isis spf-tree ipv6 [ [ level-1 | level-2 ] | verbose ] * [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
level-1: Displays Level 1 IPv6 IS-IS topology information. If no level is specified, the command displays
both Level-1 and Level-2 topology information.
level-2: Displays Level 2 IPv6 IS-IS topology information. If no level is specified, the command displays
both Level-1 and Level-2 topology information.
verbose: Displays detailed IPv6 IS-IS topology information. Without this keyword, the command displays
brief IPv6 IS-IS topology information.
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535. Without this argument, the
command displays topology information about all IS-IS processes.
Examples
# Displays brief IPv6 IS-IS topology information.