R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

517
[Sysname] isis 1
[Sysname-isis-1] ipv6 filter-policy 3000 import
Related commands
ipv6 filter-policy export
ipv6 import-route
Use ipv6 import-route to enable IPv6 IS-IS to redistribute routes from another routing protocol.
Use undo ipv6 import-route to disable route redistribution.
Syntax
ipv6 import-route protocol [ process-id ] [ allow-ibgp ] [ cost cost | [ level-1 | level-1-2 | level-2 ] |
route-policy route-policy-name| tag tag ] *
undo ipv6 import-route protocol [ process-id ]
Default
IPv6 does not redistribute routes from any other routing protocol.
Views
IS-IS view
Predefined user roles
network-admin
mdc-admin
Parameters
protocol: Redistributes routes from the specified routing protocol, which can be direct, static, ripng, isisv6,
bgp4+, or ospfv3.
process-id: Specifies a process by its ID in the range of 1 to 65535. It is available only when the protocol
is ripng, isisv6, or ospfv3.
cost cost: Specifies a cost for redistributed routes, in the range of 0 to 4261412864.
level-1: Redistributes routes into the Level-1 routing table.
level-1-2: Redistributes routes into Level-1 and Level-2 routing tables.
level-2: Redistributes routes into the Level-2 routing table.
route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters, to filter redistributed routes.
tag tag: Specifies an administrative tag for marking redistributed routes, in the range of 1 to
4294967295.
allow-ibgp: Allows redistribution of IBGP routes. This keyword is available only when the protocol is
bgp4+.
Usage guidelines
IPv6 IS-IS considers redistributed routes as AS-external routes.
You can specify a cost and a level for redistributed routes.