R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

520
undo ipv6 import-route limit
Default
The maximum number of redistributed Level 1/Level 2 IPv6 routes is not configured.
Views
IS-IS view
Predefined user roles
network-admin
mdc-admin
Parameters
number: Specifies the maximum number of redistributed Level 1/Level 2 IPv6 routes, in the range of 1 to
65536.
Examples
# Configure IS-IS process 1 to redistribute up to 1000 Level 1/Level 2 IPv6 routes.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] ipv6 import-route limit 1000
ipv6 maximum load-balancing
Use ipv6 maximum load-balancing to configure the maximum number of equal-cost multi-path (ECMP)
routes for load balancing.
Use undo ipv6 maximum load-balancing to restore the default.
Syntax
ipv6 maximum load-balancing number
undo ipv6 maximum load-balancing
Views
IS-IS view
Predefined user roles
network-admin
mdc-admin
Parameters
number: Specifies the maximum number of ECMP routes.
Usage guidelines
The value range for the number argument and the default setting depend on the max-ecmp-num
command.
If you set the maximum number of ECMP routes to m by using the max-ecmp-num command, the number
argument in the maximum load-balancing command is in the range of 1 to m and defaults to m.