R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

522
Default
IPv6 IS-IS routes have the low convergence priority.
Views
IS-IS view
Predefined user roles
network-admin
mdc-admin
Parameters
critical: Specifies the highest convergence priority.
high: Specifies the high convergence priority.
medium: Specifies the medium convergence priority.
prefix-list prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63
characters.
tag tag-value: Specifies a tag value in the range of 1 to 4294967295.
Usage guidelines
The higher the convergence priority, the faster the convergence speed.
IPv6 IS-IS host routes have a medium convergence priority.
Examples
# Assign the high convergence priority to IS-IS routes permitted by IPv6 prefix list standtest.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] ipv6 priority high prefix-list standtest
ipv6 summary
Use ipv6 summary to configure an IPv6 IS-IS summary route.
Use undo ipv6 summary to remove the summary route.
Syntax
ipv6 summary ipv6-prefix prefix-length [ avoid-feedback | generate_null0_route | [ level-1 | level-1-2 |
level-2 ] | tag tag ] *
undo ipv6 summary ipv6-prefix prefix-length [ level-1 | level-1-2 | level-2 ]
Default
No summary route is configured.
Views
IS-IS view
Predefined user roles
network-admin
mdc-admin