R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

527
Syntax
In standalone mode:
display ipv6 policy-based-route interface interface-type interface-number [ slot slot-number ]
In IRF mode:
display ipv6 policy-based-route interface interface-type interface-number [ chassis chassis-number slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number.
slot slot-number: Displays the IPv6 PBR configuration and statistics on a card. The slot-number is the
number of the slot that holds the card. (In standalone mode.)
chassis chassis-number slot slot-number: Displays the IPv6 PBR configuration and statistics of a card on
an IRF member device. The chassis-number is the ID of the IRF member device, and the slot-number is the
number of the slot that holds the card. (In IRF mode.)
Examples
# Display IPv6 PBR configuration and statistics on VLAN-interface 1.
<Sysname> display ipv6 policy-based-route interface Vlan-interface 1 slot 1
Policy based routing information for interface Vlan-interface1(failed):
Policy name: aaa
node 0 deny:
Matched: 0
node 1 permit:
if-match acl 3999
Matched: 0
node 2 permit:
if-match acl 2000
apply next-hop 1000::1
Matched: 0
node 5 permit:
if-match acl 3101
apply next-hop 1000::1
Matched: 0
Total matched: 0
<Sysname> display ipv6 policy-based-route interface Vlan-interface 1 slot 1
Policy based routing information for interface Vlan-interface1:
Policy name: aaa
node 0 deny(not support):