R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

541
undo apply local-preference
Default
No local preference is set for BGP routes.
Views
Routing policy node view
Predefined user roles
network-admin
mdc-admin
Parameters
preference: Specifies a local preference in the range of 0 to 4294967295.
Examples
# Configure node 10 in permit mode for routing policy policy1 to set a local preference of 130 for routes
matching AS path list 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match as-path 1
[Sysname-route-policy-policy1-10] apply local-preference 130
apply mpls-label
Use apply mpls-label to set MPLS labels for routing information.
Use undo apply mpls-label to restore the default.
Syntax
apply mpls-label
undo apply mpls-label
Default
No MPLS label is set for routing information.
Views
Routing policy node view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
If this command fails to assign an MPLS label to a route, the route will not be advertised.
Examples
# Configure node 10 in permit mode for routing policy policy1 to set MPLS labels for routes.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] apply mpls-label