R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

562
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
name prefix-list-name: Specifies an IP prefix list by its name, a case-sensitive string of 1 to 63 characters.
Without this argument, this command displays statistics for all IPv4 prefix lists.
Examples
# Display the statistics for IPv4 prefix list abc.
<Sysname> display ip prefix-list name abc
Prefix-list: abc
Permitted 0
Denied 0
index: 10 deny 6.6.6.0/24 ge 26 le 28
Table 139 Command output
Field Description
Prefix-list Name of the IPv4 prefix list.
Permitted Number of routes matching the criterion.
Denied Number of routes not matching the criterion.
index Index of an item.
deny
Match mode of the item:
• permit.
• deny.
6.6.6.0/24 IP address and mask.
ge Greater-equal, the lower mask length.
le Less-equal, the upper mask length.
Related commands
• ip prefix-list
• reset ip prefix-list
if-match ip
Use if-match ip to match IPv4 routes whose destination, next hop, or source matches the specified IPv4
prefix list.
Use undo if-match ip to remove the configuration.