R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

565
Predefined user roles
network-admin
mdc-admin
Parameters
prefix-list-name: Specifies an IP prefix list by its name, a case-sensitive string of 1 to 63 characters.
Without this argument, this command clears statistics for all IPv4 prefix lists.
Examples
# Clear the statistics for IPv4 prefix list abc.
<Sysname> reset ip prefix-list abc
Related commands
• display ip prefix-list
• ip prefix-list
IPv6 routing policy configuration commands
apply ipv6 next-hop
Use apply ipv6 next-hop to set a next hop for IPv6 routes.
Use undo apply ipv6 next-hop to restore the default.
Syntax
apply ipv6 next-hop ipv6-address
undo apply ipv6 next-hop
Default
No next hop is set for IPv6 routes.
Views
Routing policy node view
Predefined user roles
network-admin
mdc-admin
Parameters
ipv6-address: Specifies the next hop IPv6 address.
Usage guidelines
This command cannot set a next hop for redistributed routes.
Examples
# Configure node 10 for routing policy policy1 to set next hop 3ffe:506::1 for IPv6 routes matching AS
path list 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match as-path 1