R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

58
Field Descri
p
tion
interface summary Indicates that the route is a RIP interface summary route.
nexthop Address of the next hop.
RIP-interface Direct route on a RIP-enabled interface.
imported Indicates that the route is redistributed from another routing protocol.
display rip interface
Use display rip interface to display RIP interface information for a RIP process.
Syntax
display rip process-id interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
process-id: Specifies a RIP process by its ID in the range of 1 to 65535.
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
the command displays information about all RIP interfaces for the RIP process.
Examples
# Display information about all interfaces for RIP process 1.
<Sysname> display rip 1 interface
Interface: Vlan-interface2
Address/Mask: 1.1.1.1/24 Version: RIPv1
MetricIn: 0 MetricIn route policy: Not designated
MetricOut: 1 MetricOut route policy: Not designated
Split-horizon/Poison-reverse: On/Off Input/Output: On/On
Default route: Off
Current number of packets/Maximum number of packets: 0/2000
Table 21 Command output
Field Description
Interface Name of an interface running RIP.
Address/Mask IP address and mask of the interface.
Version RIP version running on the interface.