R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

59
Field Description
MetricIn Additional metric added to incoming routes.
MetricIn route policy
Name of the routing policy used to add an additional metric for
incoming routes. If no routing policy is used, the field displays Not
designated.
MetricOut Additional metric added to outgoing routes.
MetricOut route policy
Name of the routing policy used to add an additional routing metric
for outgoing routes. If no routing policy is used, the field displays Not
designated.
Split-horizon
Indicates whether split horizon is enabled:
• on—Enabled.
• off—Disabled.
Poison-reverse
Indicates whether poison reverse is enabled:
• on—Enabled.
• off—Disabled.
Input/Output
Indicates whether the interface is enabled to receive and send RIP
messages:
• on—Enabled.
• off—Disabled.
Default route
Indicates whether to send a default route to RIP neighbors:
• Only—Advertises only a default route.
• Originate—Advertises both a default route and other routes.
• No-originate—Advertises only non-default routes.
• Off—Advertises no default route.
Default route cost Metric for a default route.
Current number of packets /Maximum
number of packets
Number of RIP packets to be sent/maximum number of RIP packets
that can be sent within a certain interval.
display rip route
Use display rip route to display routing information for a RIP process.
Syntax
display rip process-id route [ ip-address { mask-length | mask } [ verbose ] | peer ip-address | statistics ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator