R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

64
[Sysname-acl-adv-3000] rule 100 deny ip
[Sysname-acl-adv-3000] quit
[Sysname] rip 1
[Sysname-rip 1] filter-policy 3000 export
Related commands
• acl (ACL and QoS Command Reference)
• import-route
• ip prefix-list
filter-policy import
Use filter-policy import to configure RIP to filter received routes.
Use undo filter-policy import to restore the default.
Syntax
filter-policy { acl-number | gateway prefix-list-name | prefix-list prefix-list-name [ gateway
prefix-list-name ] } import [ interface-type interface-number ]
undo filter-policy import [ interface-type interface-number ]
Default
RIP does not filter received routes.
Views
RIP view
Predefined user roles
network-admin
mdc-admin
Parameters
acl-number: Specifies an ACL by its number in the range of 2000 to 3999 to filter received routes.
prefix-list prefix-list-name: Specifies an IP prefix list by its name, a case-sensitive string of 1 to 63
characters, to filter received routes.
gateway prefix-list-name: Specifies an IP prefix list by its name, a case-sensitive string of 1 to 63
characters, to filter routes based on their next hops.
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
To reference an advanced ACL (with a number from 3000 to 3999) in the command, configure the ACL
using one of the following methods:
• To deny/permit a route with the specified destination, use the rule [ rule-id ] { deny | permit } ip
source sour-addr sour-wildcard command
• To deny/permit a route with the specified destination and mask, use the rule [ rule-id ] { deny |
permit } ip source sour-addr sour-wildcard destination dest-addr dest-wildcard command.
The source keyword specifies the destination address of a route and the destination keyword specifies the
subnet mask of the route. The subnet mask must be contiguous. Otherwise, the mask configuration does
not take effect.