R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

68
Views
RIP view
Predefined user roles
network-admin
mdc-admin
Parameters
number: Specifies the maximum number of ECMP routes.
Usage guidelines
The value range for the number argument and the default setting depend on the max-ecmp-num
command.
If you set the maximum number of ECMP routes to m by using the max-ecmp-num command, the number
argument in the maximum load-balancing command is in the range of 1 to m and defaults to m.
Examples
# Specify the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1] maximum load-balancing 2
Related commands
max-ecmp-num
network
Use network to enable RIP on an interface attached to a specified network.
Use undo network to disable RIP on an interface attached to a specified network.
Syntax
network network-address [ wildcard-mask ]
undo network network-address
Default
RIP is disabled on an interface.
Views
RIP view
Predefined user roles
network-admin
mdc-admin
Parameters
network-address: Specifies a subnet address where an interface resides.
wildcard-mask: Specifies an IP address wildcard mask. A wildcard mask can be thought of as a subnet
mask, with 1s and 0s inverted. For example, a wildcard mask of 255.255.255.0 corresponds to a subnet
mask of 0.0.0.255.