R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

77
exclude-subip: Excludes secondary IP addresses from being enabled with RIP. Without this keyword, RIP
is also enabled on secondary IP addresses of a RIP-enabled interface.
Usage guidelines
The rip enable command has a higher priority than the network command.
Examples
# Enable RIP process 100 on VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] rip 100 enable
Related commands
network
rip input
Use rip input to enable an interface to receive RIP messages.
Use undo rip input to disable an interface from receiving RIP messages.
Syntax
rip input
undo rip input
Default
An interface is enabled to receive RIP messages.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Examples
# Disable VLAN-interface 10 from receiving RIP messages.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] undo rip input
rip max-packet-length
Use rip max-packet-length to set the maximum length of RIP packets.
Use undo rip max-packet-length to restore the default.
Syntax
rip max-packet-length value
undo rip max-packet-length