R211x-HP Flexfabric 11900 Layer 3 - IP Routing Command Reference

81
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
process-id: Specifies a RIP process by its ID in the range of 1 to 65535.
Usage guidelines
If the specified process ID does not exist, the MIB binding configuration fails.
Deleting a RIP process bound to MIB operation deletes the MIB binding configuration. After the RIP
process is deleted, MIB operation is bound to the RIP process with the smallest process ID.
Examples
# Bind MIB operation to RIP process 100.
<Sysname> system-view
[Sysname] rip mib-binding 100
rip output
Use rip output to enable an interface to send RIP messages.
Use undo rip output to disable an interface from sending RIP messages.
Syntax
rip output
undo rip output
Default
An interface receives RIP messages.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Examples
# Disable VLAN-interface 10 from sending RIP messages.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] undo rip output
rip poison-reverse
Use rip poison-reverse to enable the poison reverse function.