R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

137

Load sharing commands

ip load-sharing mode per-flow

Use ip load-sharing mode per-flow to configure per-flow load sharing.

Use undo ip load-sharing mode per-flow to restore the default.

Syntax

In standalone mode:

src-port ] * ] [ slot slot-number ]

undo ip load-sharing mode [ slot slot-number ]

In IRF mode:

src-port ] * ] [ chassis chassis-number slot slot-number ]

undo ip load-sharing mode [ chassis chassis-number slot slot-number ]

Default

The device performs per-flow load sharing based on the source IP address, destination IP address, source

port, destination port, and IP protocol number.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

algorithm algorithm-number: Enables flow-based load sharing algorithm switching. The

algorithm-number argument specifies the algorithm to be switched, and is in the range of 0 to 1. Value

0 indicates the default algorithm.

dest-ip: Identifies flows by destination IP address.

dest-port: Identifies flows by destination port.

ip-pro: Identifies flows by protocol ID.

src-ip: Identifies flows by source IP address.

src-port: Identifies flows by source port.

slot slot-number: Specifies a card by its slot number. (In standalone mode.)

chassis chassis-number slot slot-number: Specifies a card in an IRF member device. The chassis-number

argument represents the IRF member ID of the device. The slot-number argument represents the slot

number of the card. (In IRF mode.)