R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

143
display rawip verbose [ chassis chassis-number slot slot-number [ pcb pcb-index ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
pcb pcb-index: Displays detailed RawIP connection information for the specified PCB. The pcb-index
argument specifies the index of the PCB, in the range of 1 to 16.
slot slot-number: Displays detailed RawIP connection information for the specified card. The slot-number
argument specifies the slot number of the card. The number range depends on the device model. (In
standalone mode.)
chassis chassis-number slot slot-number: Displays detailed RawIP connection information for the
specified card on the specified IRF member device. The chassis-number argument specifies the ID of the
IRF member device. The slot-number argument specifies the slot number of the card. (In IRF mode.)
Usage guidelines
Use the display rawip verbose command to display detailed information about socket creator, state,
option, type, protocol number, and the source and destination IP addresses of RawIP connections.
Examples
# (Distributed devices–In IRF mode.) Display detailed information about RawIP connections.
<Sysname> display rawip verbose
Total RawIP socket number: 1
Chassis: 2 Slot: 6
Creator: ping[320]
State: N/A
Options: N/A
Error: 0
Receiving buffer(cc/hiwat/lowat/state): 0 / 9216 / 1 / N/A
Sending buffer(cc/hiwat/lowat/state): 0 / 9216 / 512 / N/A
Type: 3
Protocol: 1
Connection info: src = 0.0.0.0, dst = 0.0.0.0
Inpcb flags: N/A
Inpcb vflag: INP_IPV4
TTL: 255(minimum TTL: 0)
Send VRF: 0xffff
Receive VRF: 0xffff
Table 31 Command output
Field Description
Total RawIP socket number Total number of RawIP sockets.