R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

153
display udp statistics
Use display udp statistics to display UDP traffic statistics.
Syntax
In standalone mode:
display udp statistics [ slot slot-number ]
Distributed devices–In IRF mode:
display udp statistics [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
slot slot-number: Displays UDP traffic statistics on the specified card. The slot-number argument specifies
the slot number of the card. The number range depends on the device model. (In standalone mode.)
chassis chassis-number slot slot-number: Displays UDP traffic statistics on the specified card of the
specified IRF member device. The chassis-number argument specifies the ID of the IRF member device
and the slot-number argument specifies the slot number of the card. (In IRF mode.)
Usage guidelines
UDP traffic statistics include information about received and sent UDP packets.
Examples
# Display UDP traffic statistics.
<Sysname> display udp statistics
Received packets:
Total: 240
checksum error: 0, no checksum: 0
shorter than header: 0, data length larger than packet: 0
no socket on port(unicast): 0
no socket on port(broadcast/multicast): 240
not delivered, input socket full: 0
Sent packets:
Total: 0
Related commands
reset udp statistics