R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

154
display udp verbose
Use display udp verbose to display detailed information about UDP connections.
Syntax
In standalone mode:
display udp verbose [ slot slot-number [ pcb pcb-index ] ]
In IRF mode:
display udp verbose [ chassis chassis-number slot slot-number [ pcb pcb-index ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
pcb pcb-index: Displays detailed UDP connection information for the specified PCB. The pcb-index
argument specifies the index of the PCB, in the range of 1 to 16.
slot slot-number: Displays detailed UDP connection information for the specified card. The slot-number
argument specifies the slot number of the card. The number range depends on the device model. (In
standalone mode.)
chassis chassis-number slot slot-number: Displays detailed UDP connection information for the specified
card on the specified IRF member device. The chassis-number argument specifies the ID of the IRF
member device. The slot-number argument specifies the slot number of the card. (In IRF mode.)
Usage guidelines
Detailed UDP connection information includes the socket creator, status, option, type, the protocol
number, the source IP address and port number, and the destination IP address and port number for UDP
connections.
Examples
# Display detailed UDP connection information.
<Sysname> display udp verbose
Total UDP socket number: 1
Chassis: 2 Slot: 6
Creator: sock_test_mips[250]
State: N/A
Options: N/A
Error: 0
Receiving buffer(cc/hiwat/lowat/state): 0 / 41600 / 1 / N/A
Sending buffer(cc/hiwat/lowat/state): 0 / 9216 / 512 / N/A
Type: 2