R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

183
Field Descri
p
tion
State
State of a neighbor:
• INCMP—The address is being resolved. The link layer address of the neighbor is
unknown.
• REACH—The neighbor is reachable.
• STALE—Whether the neighbor is reachable is unknown. The device does not verify the
reachability any longer unless data is sent to the neighbor.
• DELAY—Whether the neighbor is reachable is unknown. The device sends an NS
message after a delay.
• PROBE—Whether the neighbor is reachable is unknown. The device sends an NS
message to verify the reachability of the neighbor.
Type
Neighbor information type:
• S—Statically configured.
• D—Dynamically obtained.
• O—Learned from the OpenFlow module.
• I—Invalid.
Age
A hyphen (-) indicates a static entry.
For a dynamic entry, this field displays the elapsed time in seconds. If the neighbor is never
reachable, this field displays a pound sign (#).
Vpn-instance Name of a VPN or [No Vrf] with no VPN configured.
Related commands
• ipv6 neighbor
• reset ipv6 neighbors
display ipv6 neighbors count
Use display ipv6 neighbors count to display the number of neighbor entries.
Syntax
In standalone mode:
display ipv6 neighbors { { all | dynamic | static } [ slot slot-number ] | interface interface-type
interface-number | vlan vlan-id } count
In IRF mode:
display ipv6 neighbors { { all | dynamic | static } [ chassis chassis-number slot slot-number ] | interface
interface-type interface-number | vlan vlan-id } count
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator