R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

236
Allow-hint: Enabled
Rapid-commit: Disabled
Table 51 Command output
Field Descri
p
tion
Interface Interface enabled with DHCPv6 server.
Pool
Address pool applied to the interface.
If no address pool is applied to the interface, global is displayed. The
DHCPv6 server selects a global address pool to assign a prefix, an
address, and other configuration parameters to a client.
Using pool
Address pool applied to the interface.
If no address pool is applied to the interface, global is displayed. The
DHCPv6 server selects a global address pool to assign a prefix, an
address, and other configuration parameters to a client.
Preference value
Server preference in the DHCPv6 Advertise message. The value range is
0 to 255. The bigger the value is, the higher preference the server has.
Allow-hint Indicates whether desired address/prefix assignment is enabled.
Rapid-commit Indicates whether rapid address/prefix assignment is enabled.
display ipv6 dhcp server conflict
Use display ipv6 dhcp server conflict to display information about IPv6 address conflicts.
Syntax
display ipv6 dhcp server conflict [ address ipv6-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
address ipv6-address: Displays conflict information for the specified IPv6 address. If no IPv6 address is
specified, this command displays information about all IPv6 address conflicts.
Usage guidelines
The DHCPv6 server creates IP address conflict information in the following conditions:
• The DHCPv6 client sends a DECLINE packet to the DHCPv6 server to inform the server of an IPv6
address conflict.
• The DHCPv6 server discovers that the only assignable address in the address pool is its own IPv6
address.