R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

273

ipv6 dhcp snooping max-learning-num

Use ipv6 dhcp snooping max-learning-num to set the maximum number of DHCPv6 snooping entries

that an interface can learn.

Use undo ipv6 dhcp snooping max-learning-num to restore the default.

Syntax

ipv6 dhcp snooping max-learning-num number

undo ipv6 dhcp snooping max-learning-num

Default

The number of DHCPv6 snooping entries that an interface can learn is not limited.

Views

Layer 2 Ethernet interface view, Layer 2 aggregate interface view

Predefined user roles

network-admin

mdc-admin

Parameters

number: Specifies the maximum number of DHCPv6 snooping entries that an interface can learn. The

value range is 1 to 4294967295.

Examples

# Specify the Layer 2 Ethernet interface Ten-GigabitEthernet1/0/1 to learn a maximum of 1000

DHCPv6 snooping entries.

<Sysname> system-view

[Sysname] interface Ten-GigabitEthernet 1/0/1

[Sysname-Ten-GigabitEthernet1/0/1] ipv6 dhcp snooping max-learning-num 1000

ipv6 dhcp snooping option interface-id enable

Use ipv6 dhcp snooping option interface-id enable to enable support for the interface-ID option (also

called Option 18).

Use undo ipv6 dhcp snooping option interface-id enable to restore the default.