R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

290
Examples
# In standalone mode, specify the card in slot 2 to forward traffic for interface Tunnel 200.
<Sysname> system-view
[Sysname] interface tunnel 200
[Sysname-Tunnel200] service slot 2
# In IRF mode, specify the card in slot 2 of IRF member device 2 to forward traffic for interface Tunnel
200.
<Sysname> system-view
[Sysname] interface tunnel 200
[Sysname-Tunnel200] service chassis 2 slot 2
shutdown
Use shutdown to shut down a tunnel interface.
Use undo shutdown to bring up a tunnel interface.
Syntax
shutdown
undo shutdown
Default
The tunnel interface is enabled.
Views
Tunnel interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command disconnects all links set up on the interface. Make sure you fully understand the impact of
the command on your network.
Examples
# Shut down the interface Tunnel 1.
<Sysname> system-view
[Sysname] interface tunnel 1
[Sysname-Tunnel1] shutdown
Related commands
display interface tunnel
source
Use source to specify the source address or source interface for the tunnel interface.
Use undo source to restore the default.