R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

Examples

# Apply DHCP address pool 0 on VLAN-interface 2.

<Sysname> system-view

[Sysname] interface vlan-interface 2

[Sysname-Vlan-interface2] dhcp server apply ip-pool 0

Related commands

dhcp server ip-pool

dhcp server bootp ignore

Use dhcp server bootp ignore to configure the DHCP server to ignore BOOTP requests.

Use undo dhcp server bootp ignore to restore the default.

Syntax

dhcp server bootp ignore

undo dhcp server bootp ignore

Default

The DHCP server does not ignore BOOTP requests.

Views

System view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

The lease duration of IP addresses obtained by BOOTP clients is unlimited. For scenarios that do not

allow unlimited leases, you can configure the DHCP server to ignore BOOTP requests.

Examples

# Configure the DHCP server to ignore BOOTP requests.

<Sysname> system-view

[Sysname] dhcp server bootp ignore

dhcp server bootp reply-rfc-1048

Use dhcp server bootp reply-rfc-1048 to enable the DHCP server to send BOOTP responses in RFC 1048

format when it receives RFC 1048-incompliant BOOTP requests for statically bound addresses.