R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

54
Predefined user roles
network-admin
mdc-admin
Parameters
ip-address&<1-8>: Specifies gateways. &<1-8> indicates that you can specify up to eight gateway
addresses separated by spaces. Gateway addresses must reside on the same subnet as the assignable
IP addresses.
Usage guidelines
If you use this command multiple times, the most recent configuration takes effect.
Without any parameters specified, the undo gateway-list command deletes all gateway addresses.
If you specify gateways in both address pool view and secondary subnet view, DHCP assigns the
gateway addresses in the secondary subnet view to the clients on the secondary subnet.
If you specify gateways in address pool view but not in secondary subnet view, DHCP assigns the
gateway addresses in address pool view to the clients on the secondary subnet.
Examples
# Specify the gateway address 10.1.1.1 in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] gateway-list 10.1.1.1
Related commands
display dhcp server pool
if-match option
Use if-match option to configure a match rule for a DHCP user class.
Use undo if-match option to remove the match rule for a DHCP user class.
Syntax
if-match option option-code [ hex hex-string [ mask mask | offset offset length length ] ]
undo if-match option option-code [ hex hex-string [ mask mask | offset offset length length ] ]
Default
No match rule is configured for the DHCP user class.
Views
DHCP user class view
Predefined user roles
network-admin
mdc-admin
Parameters
option-code: Matches a DHCP option identified by a number in the range of 1 to 254.