R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

61
Parameters
ip ip-address: Clears conflict information about the specified IP address. If no IP address is specified, this
command clears all address conflict information.
Usage guidelines
Address conflicts occur when dynamically assigned IP addresses have been statically configured for
other hosts. After the conflicts are resolved, you can use the reset dhcp server conflict command to clear
conflict information so that the conflicted addresses can be assigned to clients.
Examples
# Clear all IP address conflict information.
<Sysname> reset dhcp server conflict
Related commands
display dhcp server conflict
reset dhcp server expired
Use reset dhcp server expired to clear binding information about expired IP addresses.
Syntax
reset dhcp server expired [ ip ip-address | pool pool-name ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
ip ip-address: Clears binding information about the specified expired IP address.
pool pool-name: Clears binding information about the expired IP addresses in the specified address pool.
The pool name is a case-insensitive string of 1 to 63 characters.
Usage guidelines
Using this command without any parameter clears binding information about all expired IP addresses.
Examples
# Clear binding information about all expired IP addresses.
<Sysname> reset dhcp server expired
Related commands
display dhcp server expired
reset dhcp server ip-in-use
Use reset dhcp server ip-in-use to clear binding information about assigned IP addresses.
Syntax
reset dhcp server ip-in-use [ ip ip-address | pool pool-name ]