R211x-HP Flexfabric 11900 MPLS Command Reference

98
verbose: Displays detailed information. If you do not specify this keyword, this command displays brief
information.
Examples
# Display brief information about all RSVP path states.
<Sysname> display rsvp sender
Destination Source Tunnel-ID LSP-ID Style Bitrate
3.3.3.9 1.1.1.9 1 5 SE 0.00
3.3.3.9 2.2.2.9 253 17767 SE 125.00
Table 37 Command output
Field Descri
p
tion
Destination Tunnel destination address.
Source Tunnel source address.
Style
Resource reservation style:
• SE—Shared-explicit style.
• FF—Fixed-filter style.
Bitrate Tunnel bandwidth in kbps.
# Display detailed information about all RSVP path states.
<Sysname> display rsvp sender verbose
Destination: 3.3.3.9 Source: 1.1.1.9
Tunnel ID: 1 Style: SE
Sender address: 1.1.1.9 LSP ID: 5
Setup priority: 7 Holding priority: 7
FRR desired: Disabled Upstream label: 1146
Previous hop: 57.10.10.1 Previous hop LIH: 0xf0008
Average bitrate: 0.00 kbps Maximum burst: 1000.00 bytes
MTU: 1500 Qos service: Controlled-Load
Recv message epoch: 0 Recv message ID: 0
Send message epoch: 0 Send message ID: 0
In-Interface: Vlan10 Local LIH: 0x35
Local address: 57.20.20.2 Refresh interval: 30000 ms
Out-Interface: Vlan11 Nexthop: 57.20.20.1
Unknown object number: 0
Receive ERO number: 2
57.10.10.2/32 Strict
57.20.20.1/32 Loose
Send ERO number: 1
57.20.20.1/32 Loose
RRO number: 1
57.10.10.1/32 Flag: 0x00 (No FRR)
Fast Reroute PLR: None
Fast Reroute MP: None
Destination: 3.3.3.9 Source: 2.2.2.9
Tunnel ID: 253 Style: SE