R211x-HP Flexfabric 11900 MPLS Command Reference

111
RSVP challenge-response handshake can be configured in the following views:
• RSVP view—Configuration in this view applies to all RSVP security associations.
• RSVP neighbor view—Configuration in this view applies only to RSVP security associations with the
specified RSVP neighbor.
• Interface view—Configuration in this view applies only to RSVP security associations established on
the current interface.
Examples
# Enable RSVP challenge-response handshake on interface VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] rsvp authentication challenge
Related commands
• authentication challenge
• authentication key
• authentication lifetime
• authentication window-size
• display rsvp authentication
• reset rsvp authentication
• rsvp authentication key
• rsvp authentication lifetime
• rsvp authentication window-size
rsvp authentication key
Use rsvp authentication key to enable RSVP authentication on an interface, and configure the
authentication key.
Use undo rsvp authentication key to disable RSVP authentication on an interface.
Syntax
rsvp authentication key { cipher | plain } auth-key
undo rsvp authentication key
Default
RSVP authentication is disabled.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
cipher: Sets a ciphertext authentication key.
plain: Sets a plaintext authentication key.