R211x-HP Flexfabric 11900 MPLS Command Reference

121
Tunnel policy commands
display mpls tunnel
Use display mpls tunnel to display tunnel information.
Syntax
display mpls tunnel { all | statistics | [ vpn-instance vpn-instance-name ] destination { tunnel-ipv4-dest |
tunnel-ipv6-dest } }
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
all: Displays all tunnels.
statistics: Displays tunnel statistics.
vpn-instance vpn-instance-name: Specifies a VPN instance by its name, a case-sensitive string of 1 to 31
characters. If you do not specify a VPN instance, the command displays tunnel information for the public
network.
destination: Displays the tunnel destined for the specified address.
tunnel-ipv4-dest: Specifies the tunnel destination IPv4 address.
tunnel-ipv6-dest: Specifies the tunnel destination IPv6 address.
Examples
# Display information about all tunnels.
<Sysname> display mpls tunnel all
Destination Type Tunnel/NHLFE VPN Instance
2.2.2.2 LSP NHLFE1024
3.3.3.3 CRLSP Tunnel2
Table 40 Command output
Field Descri
p
tion
Destination Tunnel destination address.
Type Tunnel type: LSP or CRLSP (MPLS TE tunnel).