R211x-HP Flexfabric 11900 MPLS Command Reference

122
Field Descri
p
tion
Tunnel/NHLFE
Tunnel or NHLFE entry.
NHLFEnumber represents the ingress LSP that matches the NHLFE entry
with NID of number.
VPN Instance
VPN instance name. If this field is blank, the tunnel belongs to the public
network.
# Display tunnel statistics.
<Sysname> display mpls tunnel statistics
LSP : 1
CRLSP: 0
Table 41 Command output
Field Descri
p
tion
LSP Number of LSP tunnels.
CRLSP Number of CRLSPs (MPLS TE tunnels).
preferred-path
Use preferred-path to specify a preferred tunnel in a tunnel policy.
Use undo preferred-path to restore the default.
Syntax
preferred-path tunnel number
undo preferred-path tunnel number
Default
No preferred tunnel is specified.
Views
Tunnel policy view
Predefined user roles
network-admin
mdc-admin
Parameters
number: Specifies a tunnel interface by its number in the range of 0 to 511.
Usage guidelines
This command specifies an MPLS TE tunnel interface. The destination address of the tunnel interface
identifies a peer PE so the local PE will forward traffic destined for that peer PE over the specified tunnel.
HP recommends using this method.
For a tunnel policy to solely use a tunnel, do not specify the tunnel as the preferred tunnel in other tunnel
policies.