R211x-HP Flexfabric 11900 MPLS Command Reference

149
Field Description
UPE export route policy Outbound routing policy for UPEs in the update group.
OutQ Number of prefixes to be advertised to peers in the update group.
Members Number and IP addresses of peers in the update group.
display ospf sham-link
Use display ospf sham-link to display OSPF sham link information.
Syntax
In standalone mode:
display ospf [ process-id ] sham-link [ area area-id ] [ standby slot slot-number ]
In IRF mode:
display ospf [ process-id ] sham-link [ area area-id ] [ standby chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
process-id: Displays sham link information for the OSPF process specified by its ID in the range of 1 to
65535. If no process is specified, the command displays sham link information for all OSPF processes.
area area-id: Displays sham link information for the OSPF area specified by its ID, which is an IP address,
or an integer in the range of 0 to 4294967295. If no area is specified, the command displays sham link
information for all OSPF areas.
standby: Displays information about the standby OSPF process. If you do not specify this keyword, the
command displays information about the active OSPF process.
slot slot-number: Specifies the card where the standby process resides by its slot number. (In standalone
mode.)
chassis chassis-number slot slot-number: Specifies the card in an IRF member device where the standby
process resides. The chassis-number argument represents the IRF member ID of the device, and the
slot-number argument represents the slot number of the card. (In IRF mode.)
Usage guidelines
If no process or area is specified, the command displays information about all OSPF sham links.
If OSPF NSR is enabled, the standby OSPF process backs up OSPF neighbor information and routing
information from the active OSPF process. This command with the standby keyword displays information
backed up by the specified standby process.
If OSPF NSR is not enabled, this command with the standby keyword displays nothing.