R211x-HP Flexfabric 11900 MPLS Command Reference

155
An import routing policy specified in IPv4 VPN view or IPv6 VPN view applies to only the IPv4 VPN or
IPv6 VPN.
IPv4/IPv6 VPN prefers the import routing policy specified in IPv4/IPv6 VPN view over the one specified
in VPN instance view.
Examples
# Apply import routing policy poly-1 for VPN instance vpn1.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] import route-policy poly-1
# Apply import routing policy poly-2 for IPv4 VPN vpn2.
<Sysname> system-view
[Sysname] ip vpn-instance vpn2
[Sysname-vpn-instance-vpn2] address-family ipv4
[Sysname-vpn-ipv4-vpn2] import route-policy poly-2
# Apply import routing policy poly-3 for IPv6 VPN vpn3.
<Sysname> system-view
[Sysname] ip vpn-instance vpn3
[Sysname-vpn-instance-vpn3] address-family ipv6
[Sysname-vpn-ipv6-vpn3] import route-policy poly-3
Related commands
• export route-policy
• route-policy (Layer 3—IP Routing Configuration Guide)
ip binding vpn-instance
Use ip binding vpn-instance to associate an interface with a VPN instance.
Use undo ip binding vpn-instance to remove the association.
Syntax
ip binding vpn-instance vpn-instance-name
undo ip binding vpn-instance vpn-instance-name
Default
An interface is associated with no VPN instance and belongs to the public network.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
vpn-instance-name: Specifies a VPN instance by its name, a case-sensitive string of 1 to 31 characters.