R211x-HP Flexfabric 11900 MPLS Command Reference

10
Table 6 Command output
Field Descri
p
tion
Destination LSP destination address.
FEC
Forwarding equivalence class:
• IP address/mask—Classifies FECs by destination address.
• IP address—Classifies FECs by next hop.
• IP address/Out Label—Classifies FECs by next hop and outgoing label.
• Ingress LSR ID/Tunnel ID/LSP ID—RSVP TE FEC.
• - (a hyphen)—The LSP is a static transit LSP, static egress LSP, static transit
CRLSP, or static egress CRLSP.
Protocol
Label distribution protocol:
• LDP.
• BGP.
• RSVP.
• Static.
• StaticCR—Static CRLSP.
• Local—Direct LSP.
LSR Type
LSR type:
• Ingress—The current LSR is the ingress node of the LSP.
• Transit—The current LSR is a transit node of the LSP.
• Egress—The current LSR is the egress node of the LSP.
Service
Service deployed on the LSP. This field is not supported in the current
software version and is reserved for future support.
Path ID
Forwarding path. The value is in the format of 0xnn.m, where nn represents
the NHLFE group ID of the outer LSPs that carry the current LSP, and m
represents the sequence number of the equivalence path.
NHLFE ID NHLFE entry index.
State
LSP state:
• Active—The LSP is in use.
• Inactive—The LSP is idle.
BkLabel Outgoing label of the backup LSP.
BkNexthop Next hop address of the backup LSP.
BkInterface Outgoing interface of the backup LSP.
Related commands
display mpls lsp statistics
display mpls lsp statistics
Use display mpls lsp statistics to display LSP statistics.
Syntax
display mpls lsp statistics