R211x-HP Flexfabric 11900 MPLS Command Reference

12
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
nib-id: Specifies a next hop ID in the range of 1 to FFFFFFFFFFFFFFFE. If you do not specify a next hop,
this command displays information about all MPLS next hops.
Examples
# Display information about all MPLS next hops.
<Sysname> display mpls nib
NIB ID: 0x40000000
Users: 1
Status: Active
ECMP number: 1
Outgoing NHLFE ID: 1024
Backup outgoing NHLFE ID: 1027
Table 8 Command output
Field Descri
p
tion
NIB ID ID of the next hop.
Users Number of ILM entries that use this next hop.
Status
Next hop status:
• Active—The next hop is active.
• Dummy—The next hop is inactive .
ECMP number Number of equal-cost NHLFE entries.
Outgoing NHLFE ID ID of the NHLFE entry to which the next hop corresponds.
Backup outgoing NHLFE ID ID of the backup NHLFE entry.
display mpls nid
Use display mpls nid to display usage information for dynamic NIDs.
Syntax
display mpls nid [ nid-value1 [ to nid-value2 ] ]
Views
Any view
Predefined user roles
network-admin