R211x-HP Flexfabric 11900 MPLS Command Reference

200
• Execute peer twice to connect two PWs to form a multi-segment PW.
Examples
# Create cross-connect ac2pw for cross-connect group vpn1 and enter cross-connect view.
<Sysname> system-view
[Sysname] xconnect-group vpn1
[Sysname-xcg-vpn1] connection ac2pw
[Sysname-xcg-vpn1-ac2pw]
connection remote-site-id
Use connection remote-site-id to create an auto-discovery cross-connect and enter auto-discovery
cross-connect view. If the specified cross-connect has been created, the command opens auto-discovery
cross-connect view.
Use undo connection remote-site-id to remove an auto-discovery cross-connect.
Syntax
connection remote-site-id remote-site-id
undo connection remote-site-id remote-site-id
Default
No cross-connect is created.
Views
Site view
Predefined user roles
network-admin
mdc-admin
Parameters
remote-site-id: Specifies the remote site by its ID in the range of 0 to 32.
Usage guidelines
This command creates an auto-discovery cross-connect that uses BGP to establish a PW from the local
site to the specified remote site.
In auto-discovery cross-connect view, you can execute ac interface to bind an AC to the auto-discovery
cross-connect, so the PE can forward packets between the AC and the PW.
Examples
# Create an auto-discovery cross-connect from site 1 to site 3 in site view, and enter auto-discovery
cross-connect view.
<Sysname> system-view
[Sysname] xconnect-group bbb
[Sysname-xcg-bbb] auto-discovery bgp
[Sysname-xcg-bbb-auto] site 1 range 10
[Sysname-xcg-bbb-auto-1] connection remote-site-id 3
[Sysname-xcg-bbb-auto-1-3]