R211x-HP Flexfabric 11900 MPLS Command Reference

212
The local label block matches the received label block if the following condition is met: local label block
LO ≤ remote site ID ≤ local label block LO + local label block LR – 1.
If neither peer ip-address nor local is specified, the command displays label block information received
from all peers, and the local block information that matches the received label block information. If no
local label block matches the received label block information, the command only displays the label
block information received from all peers.
Examples
# Display brief information about label blocks received from all peers.
<Sysname> display l2vpn bgp
Total number of BGP PWs: 1, 1 up, 0 down
Xconnect-group Name: vpnb, Site ID:1
Rmt Site Offset RD Nexthop In/Out Label State
2 0 2:2 192.3.3.3 65663/65664 Up
Table 69 Command output
Field Descri
p
tion
Rmt Site ID of the remote site.
Offset Offset of the label block.
# Display detailed information about label blocks received from all peers.
<Sysname> display l2vpn bgp verbose
Xconnect-group Name: vpnb, Site ID:1
Remote Site ID : 2
Offset : 0
RD : 2:2
PW State : Up
Encapsulation : VLAN
MTU : 1500
Nexthop : 192.3.3.3
Local VC Label : 1036
Remote VC Label : 1163
Link ID : 1
Local Label Block : 65663/10/0
Remote Label Block : 65665/10/0
Export Route Target: 2:2
Table 70 Command output
Field Descri
p
tion
Local VC Label Incoming label of the PW.
Remote VC Label Outgoing label of the PW.
Link ID Link ID of the PW.
Local Label Block Local label block: label base/label range/Label-block offset.
Remote Label Block Remote label block: label base/label range/Label-block offset.
Export Route Target Route target of the remote label block.