R211x-HP Flexfabric 11900 MPLS Command Reference

221
network-operator
mdc-admin
mdc-operator
Parameters
class-name: Displays information about the PW class specified by its name, a case-sensitive string of 1
to 19 characters. If no PW class is specified, the command displays information about all PW classes.
Examples
# Display information about all PW classes.
<Sysname> display l2vpn pw-class
Total number of PW classes: 2
PW Class Name PW Type Control Word VCCV CC VCCV BFD
pw1 Ethernet Enabled - -
pw2 VLAN Disabled - -
Table 80 Command output
Field Descri
p
tion
VCCV CC
VCCV CC type. This field is not supported in the current software version and is
reserved for future support.
VCCV BFD
VCCV BFD type. This field is not supported in the current software version and is
reserved for future support.
Related commands
pw-class
display l2vpn service-instance
Use display l2vpn service-instance to display service instance information.
Syntax
display l2vpn service-instance [ interface interface-type interface-number [ service-instance instance-id ] ]
[ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Displays service instance information for the specified Layer 2
Ethernet interface or Layer 2 aggregate interface. If no interface is specified, the command displays
service instance information for all Layer 2 Ethernet interfaces and Layer 2 aggregate interfaces.